PDH Microwave System

Digital Microwave Radio System, PDH Microwave Radio System, Digital Microwave Transmission System. Microwave Point to Point Digital Microwave Radio System,PDH Microwave Radio System, Digital Microwave Transmission System. Microwave Point to Point Link System. ELink-EBprovides reliable, full-duplex data communications between two sites with line-of-sight clearance. It provides nE1(n=4 or 8) and Ethernet bridgelink allowing the user to connect any data terminal devices with E1, ports V.35ports and a 10/100BaseT port, which complies with CCITT G.703, CCITT V.35 andIEEE802.3. The activation of the E1 and V.35 link are autodetected and the throughput bandwidth for the Ethernet data is auto adaptedfrom 2Mbps to 14Mbps.10/100BT interface auto-sensed or user definable operation mode. Data ismodulated and transmitted to the remote-end equipment where it is recovered andpassed to the receiving user device. This process occurs simultaneously in bothdirections. ELink-EBwireless communications system uses spread spectrum processing which reducesthe transmitted power density and thus reduces the potential for interferenceinto the neighboring communications systems. For this reason, many governmentsallow such system to operate without a site license. Speicification:System gain: 106dB(not including antenna gain) Operating frequency A,B, C Band Tx/Rx interval 65MHz RF bandwidth: 20MHz RF output: +20dBm/+24dBm Modulation mode QPSK Receive Sensitivity -86dBm,Pe=10-6 Non-damaged received level 0dBm Demodulation QPSKdemodulation AGC range >50dB Data capacity nE1 (n=4 or 8), V.35 Data rate Share 16.384Mbps Data interface Complywith CCITT G.703 and CCITT V.35 Connector BNCand DB-25 Input voltage -48V±10%DC Power consumption: 30W/-48VDC(Max. transmitting power) Fuse 2Afast Indoor -10+50 Outdoor -30 +60 Humidity 95% non-condensed Storage temperature -55 125